Installed my #meshtastic node 20ft above ground with a high gain 8dBi #antenna . Reliably hitting many nodes now and even got folks responding on ‘LongFast’ channel. I spent about $30 on parts for this. Used a 10ft 2" ABS pipe, U-mounts, scrap wood and a 3d printed adapter to stabilize the antenna against the pole. Next I’ll make some sheet aluminum angle pieces and mount the 6W panel to the rig - I have a week and a half until the fully charged battery drains :)

followup:

@chris657@mastodon.social thanks! so far the setup is holding up and reception is much better given that lines of sight are more usable.