Content

Another pilot year and another great , 2024-Dec-09 Mon, "Christmas Party in the Aerodynamic Aviation hangar :) "

(From Left to Right Bare Champ Fuselage Decorated)

Another pilot year and another great Christmas Party in the Aerodynamic Aviation hangar :) Food was great, beverages were adult and everybody was awesome! Here to another safe and merry aviation year :)

#aviation #masto2hugo

more...

#fbi #cisa #calea programs admitted to , 2024-Dec-07 Sat, "be some of the vectors for #salttyphoon compromise "

#fbi #cisa #calea programs admitted to be some of the vectors for #salttyphoon compromise of US telecommunications infrastructure. FBI is advising people to use encrypted messengers for text and voice communications!! Same FBI (+other three letter agencies) which forever advocated for backdoors, now admit this compromise is in part their doing!!! #signal and others for the win! #security https://www.virtru.com/blog/file-encryption/salt-typhoon-fbi-cisa

#politics #computers #masto2hugo

more...

Got my FLSun SR, , 2024-Dec-04 Wed, "set it up and now working on getting "

(Freecad View of Flsun Sr Spool Holder Roller)

Got my FLSun SR, set it up and now working on getting reliable, repeatable and very dimensionally correct prints. I’m using the Vector3D Califlower mk2 test print and calculator to adjust for dimensional accuracy. It is well worth the $13, see: https://vector3d.shop/products/califlower-calibration-tool-mk2 Given low price tag, I would say the only low point is rough spool holder which can be quickly corrected with this spool roller: https://www.thingiverse.com/thing:6856884 thingiverse.com/thing:6856884

#3dprinting #masto2hugo

more...

To maximize longevity of my #generator , 2024-Nov-27 Wed, "I prepared 1Gal of ethanol free gasoline. Since "

(Clockwise From Top Left Generator Marked With Ethanol)

To maximize longevity of my #generator I prepared 1Gal of ethanol free gasoline. Since ethanol will bind with water, all that is needed is some #chemtrails liquid!! I used a clear fuel resistant container, fabricated a drain nipple and used 0.2Gal of dyed chemtrails. Add 0.5Gal gasoline, mix well and settle for 12 hours. With 10% ethanol, 0.25Gal dyed water will settle and can be drained. That + fuel stabilizer + marvel oil is good for at least 12 months.

#diy #mechanic #masto2hugo

more...

Nice clear post-frontal #weather after , 2024-Nov-24 Sun, "the "Bomb Cyclone" passed with rain and reasonable "

(Clockwise From Top Left Bomb Cyclone Weather Forecast)

Nice clear post-frontal #weather after the “Bomb Cyclone” passed with rain and reasonable wind. Beforehand, I got the generator out for a 6mo run, it fired right up and I ran it for 20min to flush the carb. As a test, I tried operating the fridge on #generator . This “1800W” Pulsar can run in non-power saving medium rpm mode & governs up as load increases, BUT! not fast enough for fridge compressor to not stall. I would see 1000W for 3sec and then fridge would give up :/ #diy …continued…

#diy #masto2hugo

more...

Imagine Christmas 1989 and you got , 2024-Nov-23 Sat, "this high end desktop air-band scanner from "

(Radio Shack Realistic Pro 2023 Desktop Airband Scanner)

Imagine Christmas 1989 and you got this high end desktop air-band scanner from Radio-Shack for $179 ($455 in 2024 money). Wood grain, digital keypad, back-lit lcd display and 20, I say TWENTY memories!! Receives your airport ATIS in your kitchen 10mi away and has excellent selectivity and sensitivity. Now move 35 years later. $20 on eBay and 20 min cleaning gets you the same excitement and performance and you even remember programming :)

#aviation #hamradio #masto2hugo

more...

Mountain diving a quad in Austria - , 2024-Nov-23 Sat, "I haven't seen Mr. Steele video in a "

Mountain diving a quad in Austria - I haven’t seen Mr. Steele video in a long time!! #fpv #quad #rc #radiocontrol https://youtu.be/IHEsv5XS8QQ youtu.be/IHEsv5XS8QQ

#rc #masto2hugo

more...

Flsun Super Racer is on sale , 2024-Nov-20 Wed, "for $199 - I've been eyeing their products for "

Flsun Super Racer is on sale for $199 - I’ve been eyeing their products for a few years, but made do with my upgraded MP Mini Delta. I’m excited to be able to print larger models in one piece and directly via USB (MP has 8-bit processor and is too slow to receive on usb and print reliably - must use memory cards). #flsun #3dprinting #3dp #deals https://us.store.flsun3d.com/products/super-racer-sr

#3dprinting #masto2hugo

more...

Interesting introduction of bluesky "decentralized" approach , 2024-Nov-18 Mon, "and feasibility of self hosting for individual users. "

Interesting introduction of bluesky “decentralized” approach and feasibility of self hosting for individual users. #federated #activitypub #bluesky #selfhosting https://anderegg.ca/2024/11/15/maybe-bluesky-has-won?utm_source=tldrnewsletter

#computers #socialmedia #masto2hugo

more...

6mo maintenance day. , 2024-Nov-17 Sun, "Rotated tires + had them re-balanced. "

(Clockwise From Top Left Oil Extractor Pump In)

6mo maintenance day. Rotated tires + had them re-balanced. Old school oil change every 3k miles, but I save time with an oil extractor pump. Using FRAM Ultra Synthetic filters rated for 20k miles I change the filter every 3rd oil change. Between frequent oil changes and Idemitsu GF6 synth I hope to make 200k+ :) Washed exterior, detailed, vacuumed, washed interior upholstery, conditioned plastics & leather. Even splurged on a new car smell air freshener :)

#diy #cars #miata #mechanic #masto2hugo

more...

Watched this video and snapped one , 2024-Nov-14 Thu, "of these "hangar scanners" :) #pilot #aviation #flying "

Watched this video and snapped one of these “hangar scanners” :) #pilot #aviation #flying #avgeek #pilotlife #hamradio https://www.youtube.com/watch?v=bcFilSVrQ2A

#aviation #hamradio #masto2hugo

more...

Another weekend #diy project - 20-30% , 2024-Oct-16 Wed, "power increase on #Honda #Grom . These are made "

(Left to Right Old Airbox Left Side With)

Another weekend #diy project - 20-30% power increase on #Honda #Grom . These are made for affordable, reliable, daily transportation - which means lots of power is “left on the table”. I already have high flow exhaust, so remaining easy power upgrades were: intake, camshaft and ECU retune. Went with Chimera short ram intake, Decha Performance HR camshaft and DHM ECU stage2 retune. Now the motor keeps pulling hard above 7k whereas before it ran out of breath.

#diy #motorcycles #grom #mechanic #masto2hugo

more...

#ATGATT - All The Gear All The , 2024-Oct-07 Mon, "Time is a good way to increase #motorcycle "

#ATGATT - All The Gear All The Time is a good way to increase #motorcycle safety. I wear full length gear, including chest and rib armor, along with full height adventure boots. Using the gear should be painless, convenient and quick. In my case the pain was old freestanding always wanting to tip coat hanger. Then I had a wall mounted replacement, but it was crowded. Today I grabbed some 2x4, wall anchors and hooks and solved it for real!

#diy #motorcycles #masto2hugo

more...

Morserino-32 production is ending due , 2024-Oct-06 Sun, "to parts unavailability. This is a fully self "

Morserino-32 production is ending due to parts unavailability. This is a fully self contained, battery powered #cw trainer, keyer and decoder with wifi and lora connectivity. Even includes capacitive paddles!! I’m using it daily to pick up and practice my cw for few minutes at a time. I’m looking forward to building it’s successor kit :)

#hamradio #cw #masto2hugo

more...

No more excuses, , 2024-Sep-29 Sun, "I'm starting my #qrplabs #qcx mini build tonight "

No more excuses, I’m starting my #qrplabs #qcx mini build tonight :) The remaining excuse WAS that my new #40m #efhw element and transformer were not tuned. I finally purchased a #nanovna -h and got below 1.2 VSWR in the center of #CW band :) Also used my efhw #3dp insulator to allow quick returning (design similar to tent guy lines lock). Out of curiosity I checked this ant on 10m but it was ~3. It will be easier to make a 10m than go for linked setup.

#3dprinting #hamradio #cw #masto2hugo

more...

#Honda #Grom seat is quite uncomfortable , 2024-Sep-22 Sun, "and this weekend I fixed it. I used "

(From Top to Bottom Grom Seat With Centerline)

#Honda #Grom seat is quite uncomfortable and this weekend I fixed it. I used an aftermarket high-grip skin and a 2.5cm thick gel pad. I also re-profiled the seat to round out an annoying ridge between front&back. I was hoping for a straight across shape (motocross style) but didn’t have foam + hotwire to build it up. It looks 8/10, high grip, and comfort got a big upgrade. Not bad for a first attempt.

#diy #motorcycles #grom #mechanic #masto2hugo

more...

everyone will be a millionaire!!, 2024-Sep-20 Fri, " #inflation #deficit "

“everyone will be a millionaire!!” #inflation #deficit https://www.youtube.com/watch?v=KV488-rQ30s

#politics #masto2hugo

more...

Today #diy replaced another switch + #repaired , 2024-Sep-18 Wed, "the shell with baking soda and super glue. "

(Clockwise From Top Left Logitech Trackman Marble Mouse)

Today #diy replaced another switch + #repaired the shell with baking soda and super glue. Next time I’ll use Japanese Omron switches :) #Logitech #trackman #marble is my pointing device for last 20 years. Introduced with PS/2 in 2002, later revised for USB + 4-buttons and discontinued in ~2022. On amazon a new-old-stock from Logitech sells for $209!!! On ebay new one sells for $150 and used for $45. I have three units. My daily driver already had 2 switches replaced and another 1 switch.

#diy #masto2hugo

more...

I miss my plane and youtube, 2024-Sep-16 Mon, "fed me this #cessna #c140 walk around video "

I miss my plane and youtube fed me this #cessna #c140 walk around #video - it is a really nice looking example. I also do like how fabric wings fly :) #pilot #aviation #flying #avgeek #pilotlife

#cessna140 #aviation #video #masto2hugo

more...

I like the concept of capacitive , 2024-Sep-15 Sun, "paddles, but the #morserino -32 execution is somewhat "

(Composite Picture of Morserino 32 With Capacitive Paddles)

I like the concept of capacitive paddles, but the #morserino -32 execution is somewhat lacking as the PCB paddles wiggle their way out of their slots during operation. The remedy is simple, a small 3d printed block to slide between case and between paddles to align, stabilize and prevent shifting. It feels so precise when sending #cw with this improved setup - you feel touching the paddle, zero movement and it responds.

#hamradio #morserino32 #cw #masto2hugo

more...

Looks like Trent Palmer is selling , 2024-Sep-09 Mon, "his #Freedomfox . I don't know about that - $230k "

(Picture of Trent Palmer Selling His Iconic Freedomfox)

Looks like Trent Palmer is selling his #Freedomfox . I don’t know about that - $230k is a bit steep, but the market will sort it out. I’m expecting a sponsorship from FreedomCarbonCrafters or alike :) Neat airplane, but the super lightweight 4s and lightweight 5/7s seem to fly better. Even Trent’s videos were more fun to watch when he was flying lighter souped-up 912 vs the heavy + nose-heavy 915. I hope his new plane is a fun side-up-grade!! :)

#aviation #masto2hugo

more...

As I'm learning #CW I continue , 2024-Sep-09 Mon, "to experiment with #SDR receive and change my "

(Clockwise From Top Left New 5w Transformer Vs)

As I’m learning #CW I continue to experiment with #SDR receive and change my setup to improve usability. I’m using 40m #EFHW on a 26ft fishing pole as a inverted-V mast. While receive-only for now, I used my 25W EFHW transformer (from before selling G90) but find it bulky. I bought and build KM4CFT’s 5W efhw transformer and configured it with bullet connectors and creative use of paracord and zip-ties for anchoring the antenna wire. I also built 8-winder to avoid tangles and quick setup.

#hamradio #cw #masto2hugo

more...

Discussion on landing fees program in , 2024-Sep-08 Sun, "FLorida. Europe is a fan and their GA "

Discussion on landing fees program in FLorida. Europe is a fan and their GA is barely scraping by. US has system of aviation FAA fund from fuel sales with local governments providing and charging for hangars, tie downs and fuel sales revenue along with taxes from business on airport related to aviation. It works and promotes aviation. Now local governments are trying to tax on services and infrastructure already paid for. https://forum.avweb.com/t/florida-airports-lining-up-to-impose-new-fees/25534

#aviation #masto2hugo

more...

Got a fancy #cwmorse ., 2024-Sep-01 Sun, "us machined aluminum #cw key. "

(From Left to Right Cwmorse Us 3d Printed)

Got a fancy #cwmorse .us machined aluminum #cw key. Dual paddle, ball bearings, magnetic tension and base, and fully adjustable. Very precise and a big upgrade from the 3d printed #cwmorse unit. I started with their single 3dp paddle and added stronger springs but it didn’t feel consistent. This one DOES! Some downsides: loud contact clicks, need to hold horizontal due to heavy arms, can’t touch tension adjustment screw when operating. Rating it 8 while #3dp was 4.

#3dprinting #diy #hamradio #cw #masto2hugo

more...

I've used #pytype for >year now , 2024-Aug-31 Sat, "and recently ran into latest release on 3."

I’ve used #pytype for >year now and recently ran into latest release on 3.11 not being able to handle a simple signature of a function returning a closure. Finally I looked into what other type checkers are popular today and discovered #mypy . With –strict it did a great job. Go #dropbox ! I guess this happens when a big tech company fires their py team ( #pytype ).

#devel #masto2hugo

more...

good laugh! #programming #linux #code #10x , 2024-Aug-22 Thu, "#developer "

good laugh! #programming #linux #code #10x #developer https://www.youtube.com/watch?v=kKAue9DiHc0

#devel #linux #masto2hugo

more...

I bought #honda #grom for 3 , 2024-Aug-18 Sun, "reasons: - a) as customize and mod project (cheap) - "

(Clockwise From Upper Left Sf Grom With Stunt)

I bought #honda #grom for 3 reasons: - a) as customize and mod project (cheap) - b) get comfortable working on engine internals (cheap) - c) learn to wheelie (cheap and non-intimidating) I’ve been shopping for stunt bars (see c) and finally decided on #AngryStuntz unit - reasonably priced, beefy, should work with most tail tidys. Install was quick, but I needed to trim the tidy to make it all fit under the bars + drilled out from metric to imp.

#diy #motorcycles #grom #mechanic #masto2hugo

more...

The replacement "premium" gasket for clutch-, 2024-Aug-17 Sat, "side engine cover arrived. 3x the price of "

(Honda Grom Laying Down on a Blanket Ready)

The replacement “premium” gasket for clutch-side engine cover arrived. 3x the price of #Honda cork-n-paper but worth it!! Strong fiber base + nice silicone bead. I laid the bike down, kept oil in, didn’t make a mess, gasket wasn’t sliding during installation and I was done in 20min. Previously, I had the #Grom on a stand and considered laying it down too hacky. But! that way is superior - better lighting, no mess, gasket doesn’t slide…

#diy #motorcycles #grom #mechanic #masto2hugo

more...

I'm learning #cw with #morserino32 + a , 2024-Aug-14 Wed, "sideswiper for simplicity. Now that I'm pretty good "

I’m learning #cw with #morserino32 + a sideswiper for simplicity. Now that I’m pretty good at sending at 18wpm (my letter spacing stretches as I get fatigued) I’m thinking of getting a dual paddle and I am exploring different keyer modes. Ran across this awesome video highlighting #ultimatic vs #iambic A and B. For somebody who only used a #sideswiper , I’m sold + #morserino supports it! Q. aside from HF radios keyer support, any downsides? #hamradio #amateurradio https://youtu.be/Hn4j2nfdKNE youtu.be/Hn4j2nfdKNE

#morserino32 #hamradio #cw #masto2hugo

more...

Another weekend project, , 2024-Aug-12 Mon, "this time Honda Grom. "

(Clockwise From Upper Left Oem Pump and New)

Another weekend project, this time Honda Grom. Todo: remove oil spinner, install high flow oil pump with rear pickup, install 60% over clutch springs and billet lift plate with six bolts, and a Kitaco clutch cover with cartridge oil filter. This will make oil changes a 5min job, will flow 30% more oil for better cooling and no oil starvation when front wheel is off the ground!! Clutch upgrade fixes OEM’s slippage. Spinner removal saves 2.5lb!!

#diy #motorcycles #grom #mechanic #masto2hugo

more...

"Amphibian Story" by William Wynne - on, 2024-Aug-10 Sat, " #homebuilding , #aviation , "

“Amphibian Story” by William Wynne - on #homebuilding , #aviation , #Oshkosh and life :) #flying #avgeek #pilot #pilotlife https://flycorvair.net/2016/08/28/amphibian-story/amp/

#aviation #masto2hugo

more...

I had an itch to do , 2024-Aug-04 Sun, "some retro computing 😀 My roots are Atari800, then "

(Video Link: 86box of 286 20 With 4mb Ram)

I had an itch to do some retro computing 😀 My roots are Atari800, then some #286 and finally my own #486. With popularity of #retrocomputing , highish prices, space requirements and need to recap old hw, I looked for emulation. #Dosbox was ok, #dosbox -x was better, but still paravirtualizes OS and IO, and had compatibility issues. Finally tried #86box 4.2! I went with late 286-20 with 4MiB, VGA and SB2.0, but modern FreeDos 1.3.

#computers #video #masto2hugo

more...

Done with KTM Babyduke 390 \o/, 2024-Jul-24 Wed, "Installed aftermarket airbox cover filter under the seat. "

(Clockwise From Upper Left Duke390 Powertronics Changing Tps)

Done with #KTM #Babyduke 390 \o/ Installed aftermarket airbox cover filter under the seat. Doubles intake filtered surface area for moar power & sound! Previous owner damaged threads of fairing nut plates by trying to use non-metric bolts. Chased threads with a M6 tap, epoxied cracked catches and replaced one broken catch with a hardwood block + a wood screw!! :) Finally quickened the throttle via Powertronics: 80% twist gives 100% power! whoa!

#diy #motorcycles #mechanic #masto2hugo

more...

#oshkosh #osh2024 #oshkosh2024 experiences a fatal , 2024-Jul-22 Mon, "accident on the first day of the fly "

#oshkosh #osh2024 #oshkosh2024 experiences a fatal accident on the first day of the fly in. :( #aviation #pilot #flying #flyin #avgeek #pilotlife https://www.thenorthwestern.com/story/news/local/oshkosh/airventure/2024/07/22/2-die-in-plane-crash-in-field-south-of-eaa-airventure-oshkosh-grounds/74501785007/

#aviation #flyin #masto2hugo

more...

With bike on stand and waiting , 2024-Jul-18 Thu, "for parts, I couldn't resist finding something to "

(Left to Right Ktm Duke 390 Motorcycle On)

With bike on stand and waiting for parts, I couldn’t resist finding something to do. The rear lamp was crooked, so took tail apart & found alignment studs cracked - ordered new lamp. Then upgraded mirrors, ordered intake mod which adds filtered air-path from under the seat and backed up the PowerTronics. Old 112-link chain was stretched a WHOLE link - it NEEDED replacing -> bling orange EK. Waiting for more parts :) No 10mm wrenches were lost 😆

#diy #motorcycles #mechanic #masto2hugo

more...

Drivetrain service on #KTM 'Baby-Duke' , 2024-Jul-11 Thu, "390 after I measured the chain stretch and "

(Clockwise From Top Left Cleaned Up Front Sprocket)

Drivetrain service on #KTM “Baby-Duke” 390 after I measured the chain stretch and it was out of spec. Installed new rear spools, removed the old chain, old front and rear sprockets, removed 4mm of grime in the front sprocket housing, cleaned the chain guides and serviced the air filter. Now I must wait for new parts. I already changed the oil, bled the brakes and flushed with new brake fluid in the spring. 10k miles on this motorcycle so far!!

#diy #motorcycles #mechanic #masto2hugo

more...

I setup my RTL-SDR-v3 , 2024-Jul-09 Tue, "for HF on #Linux using #SDR ++. Used a "

(Sdr Software Screen on Linux Showing 40m Waterfall)

I setup my RTL-SDR-v3 for HF on #Linux using #SDR ++. Used a 40m EFHW badly strung 5ft off the ground around the garden in #NVIS configuration. I was able to pick up CW from CA, NV, AZ and CA<->TX SSB. Also FT8 and JS8. Problem: on the #CW end of the band, I’m picking up an AM station which I assume is coming in via IF. Do I need real ground? or better common mode choke? Please advise. Having sold my bulky G90, I will use SDR, learn CW and get QCX once I can “hear” :)

#linux #hamradio #cw #masto2hugo

more...

This is what happens when hobbies , 2024-Jul-07 Sun, "spill over - #motorcycles #cars :) The overhaul included "

This is what happens when hobbies spill over - #motorcycles #cars :) The overhaul included new wheels, new dual ignition, new spark plugs, new injectors, new heat shields, new wiring and new instrumentation, along with a good cleaning. This is our ~7 year old #grill with a solid frame, but with rusted out hot side. I replaced $80 worth of parts and now it should last another 7 years :) No waste and it took less time than assembling a new grill.

#diy #mechanic #masto2hugo

more...

4th of July #epic2k24 ride organized , 2024-Jul-07 Sun, "by #BASM . Around 100 bikes attended - mostly #sumos , "

(Epic2k24 Ride Around San Francisco Start at Ocean)

4th of July #epic2k24 ride organized by #BASM . Around 100 bikes attended - mostly #sumos , but there was everything from Groms to Harleys and Super Sports. Everyone was safe, tourists in #SF had an additional attraction and at the end we all had delish #tacos . Including ride to and from, I made 165 miles.

#motorcycles #masto2hugo

more...